J-Link ARM Pro仿真器jlink全功能ARM JTAG 自动升级【北航博士店

J-Link-arm Pro特点：
   与 J-Link ARM 完全兼容以太网接口 USB 2.0接口
    支持 ARM®7/9/11, Cortex™-M3 core 包含 thumb mode
    针对未来固件的延展有更多的存储(ARM11, X-Scale, Cortex R4, Cortex A8)
    包含的软件License:J-Link ARM RDI, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server,
    J-Flash ARM 增加电源和复位LED指示灯
    通过 web 接口简单配置 TCP/IP (内置WEB服务器)
    内置 GDB Server (计划在不久的将会生效)
    支持Serial Wire Debug (SWD)
    支持Serial Wire Viewer (SWV)
    自动识别内核 JTAGZ大时钟可达 12 MHz 下载速度可达720 Kbytes/S (高速下载可在不久实现)
    DCC 速度可达 800 Kbytes/s
    与IAR Embedded Workbench® IDE无缝集成
    USB供电，或是直接连接J-Link ARM pro的电源供应。
    支持自适应时钟所有JTAG信号能被监控，
    目标板电压能被检测支持多个设备调试完全支持即插即用
    20针标准的JTAG连接器较宽的目标板电压： 1.2-3.3V，5V
    包含USB和20针的电缆线包含内存观察器（J-Mem）
    可选配软件开发包（SDK）软件
    支持嵌入式跟踪缓存（ETB）
    可选配5V电压适配器可选配
    14针的JTAG适配器通过以太网形成与主机（PC）电流隔离器
    可选配电流隔离器电源供应：J-Link可以提供达300mA电流给目标板，并有过载保护功能

是什么使J-Link Pro引人注意的，有许多方面:
价格:购买一套 J-Link ARM Pro, 它包含了与J-Link相关的所有软件licenses。它可以节省很多钱，因为单独购买软件产品licenses和J-Link将是十分昂贵的。
速度:J-Link Pro通过 TCP/IP 提供比通过USB还要高速的下载速度。
可用性:J-Link Pro被用于 "out-of-the-box"。一个内置的 J-Link ARM GDB Server 在不久就将可使用。
适用性:基于以太网接口，使得在PC和目标系统之间远距离开发成为了可能。客户可以使用J-Link Pro默认设置，在其大范围的内联网中使用也是可能的。
安全性:当通过以太网使用 J-Link ARM Pro时, PC和目标系统之间的电流隔离器可以进行保护。
长远性:针对未来固件延展提供更多的Memory(ARM11， X-Scale， Cortex R4， Cortex A8)

J-Link ARM Pro is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators.

It connects via Ethernet ｏｒ USB to the Windows (2000/XP/Vista) PC host.

J-Link ARM Pro is fully compatible with J-Link ARM and can be used "out-of-the-box". J-Link ARM Pro uses DHCP per default. The built-in webserver makes manual ｃｏｎｆｉｇuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development ｏｒ production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

All features of the regular J-Link ARM also apply to this product.

Features
Fully compatible to J-Link ARM
Ethernet interface
USB 2.0 interface
Any ARM 7/9/11, Cortex-M3 core supported, including thumb mode
Additional LEDs for power and RESET indication
Comes with web interface for easy TCP/IP ｃｏｎｆｉｇuration (built-in webserver)
Serial Wire Debug (SWD) supported
Serial Wire Viewer (SWV) supported
Automatic core recognition
Maximum JTAG speed 12 MHz
Download speed up to 720 Kbytes/second
DCC speed up to 800 Kbytes/second (Measured with J-Link ARM Pro Rev. 1, ARM7 @ 50 MHz, 12MHz JTAG speed.)
Seamless integration into the IAR Embedded Workbench IDE
Powered through USB ｏｒ power supply which comes with J-Link ARM Pro
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Support for multiple devices
Fully plug and play compatible
Standard 20-pin JTAG connector
Wide target voltage range: 1.2V - 3.3V, 5V tolerant
USB and 20-pin ribbon cable ｉｎｃｌｕｄｅd
Memory viewer (J-Mem) ｉｎｃｌｕｄｅd
Comes with licenses for: J-Link ARM RDI<>, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server, J-Flash ARM
Software Developer Kit (SDK) available
Embedded Trace Buffer (ETB) support
Adapter for 5V JTAG targets available
14-pin JTAG adapter available
Galvanic isolation from host ｓｙｓｔｅｍ via Ethernet
Optical isolation adapter available
Target power supply: J-Link can supply up to 300 mA to target with overload protection.
Coming soon: firmware extensions (ARM11, X-Scale, Cortex R4 / A8 / A9), built-in GDB Server

★博航嵌入式--品质值得信赖★